19” SmartFID ST CxHy analyser

19” SmartFID ST CxHy analyser

SmartFID ST is a 19”/4HU mounted device for continuous measurement of volatile organic compounds (VOC) on gases. It works with a flame ionization detector (FID) and converts hydrocarbon concentrations in a measuring gas sample into an electrical signal. This happens with a hydrogen diffusion flame and VOC-free air in a burner in an electrical field. The hydrocarbons in the sample gas are cracked up in CH-fragments which oxidate to CHO+ -Ions.

This ion flow can be measured and is proportional to the concentration of VOC. The measurement values are displayed on the touchscreen in units of ppm or mgC so that a translation is not necessary. The measuring gas sample is drawn by an integrated diaphragm pump which is installed in the heated sensor block. A part of the gas is led to the FID the remaining gas is led out via bypass.

A pressure control keeps the pressure of the measuring gas constant when the gas is entering the analysis chamber. The parts that are in contact with the measuring gas are heated up to 200° C so that SmartFID can be used in almost every industrial process without condensation problems. The device comes with a self-control of detector-flame, measuring gas pump, sample-pressure and bias voltage.


Benefits:

  • Automatic operation with extensive self-operated monitoring and securityfunctions
  • Internal datalogging
  • Network-compatible
  • Approved detector-geometry
  • Low fuel gas consumption
  • Low operating cost
  • Internal temperature control for heated pipes

Applications:

  • Emissions from thermic, catalytic, biological, and activated charcoal exhaust air purification plants
  • Maximum work place concentration value
  • Hydrocarbon emission in crude gas and clean gas
  • Process monitoring and control of manufacturing plants
  • Emissions from (combustion) engines
  • Detection of hydrocarbonbreakthroughs in exhaust air purifiers and chemical cleaning plants
  • Emissions on power plants, garbage incineration plants and mechanical waste treatment plants

Specifications

Measuring range
0 ... 100.000 ppm / 0 ... 160.000 mgC
Measuring principle
Flame ionization detection (FID)
Conform
CE, EMV, VDE 0701, DIN EN 15267-3
Supply voltage
115 ... 230 V / 48 ... 63 Hz
Analouge outputs
2x 0/4 ... 20mA; Free configurable
Digital outputs
3 potential-free contacts:
250 V AC 1 A, Free configurable
Detection limit
≤1,5% of upper range value
EN 15267-3 certificate
Yes
Response time
< 1,5 s
Heat up time
25 min.
Dimensions (H x W x D)
177 x 483 x 365mm
Display
5,7'' LCD touch screen
Weight
12 kg
Electrical safety
CE
Max. flow
ca. 1,2 l/min

Downloads

Video

SmartFID mobile
Video afspelen