DUSTHUNTER C200 Dust measuring device
DUSTHUNTER C200 Dust measuring device
DUSTHUNTER C200 – Two in one – Dust monitor with transmittance and scattered light measuring principle
The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles transmittance and scattered light forward. Therefore, it is ideal for measurement of very low to high dust concentrations. The automatic self-alignment secures the optimal position of the measuring beam and prevents incorrect measurements with that. An automatic self-alignment. An automatic check of zero and reference point as well as a contamination monitoring is integrated in the device.
Specifications
Measuring range
0 ... 5 mg/m³ / 0 ... 200 mg/m³
Measuring principle
Transmittance measurement, scattered light forward
Ambient temperatures
–40 °C ... +60 °C
Interfaces
USB 1.1 / RS-232 / RS-485 / Ethernet
Bus protocol
Modbus TCP / OPC / SOPAS ET / Modbus RTU / PROFIBUS DP
Protection class
IP66
Conform
2001/80/EC, 2000/76/EC,
27.BImSchV, TA-Luft, EN 15267,
EN 14181, MCERTS, 2010/75/EU,
U.S. EPA PS-11 compliant,
U.S. EPA PS-1 compliant
27.BImSchV, TA-Luft, EN 15267,
EN 14181, MCERTS, 2010/75/EU,
U.S. EPA PS-11 compliant,
U.S. EPA PS-1 compliant
Channel diameter
0.5 m ... 3m (DHC-R0)
2.5 m ... 8m (DHC-R1)
2.5 m ... 8m (DHC-R1)
Supply voltage
90 ... 250V AC / 47 ... 63 Hz (version with 24V DC available as an option)
Analogue outputs
3x 0/2/4 ... 20mA, max. load 750Ω;
Electrically isolated, two additional outputs if using I/O modules (option)
Electrically isolated, two additional outputs if using I/O modules (option)
Analogue inputs
2x 0 ... 20mA
Not electrically isolated, two additional inputs if using I/O modules (option)
Not electrically isolated, two additional inputs if using I/O modules (option)
Digital outputs
5 relay contacts: 48V, 1 A
Potential-free, for status signals
Potential-free, for status signals
Digital inputs
4 potential-free contacts
Accuracy
≤ 2 %
EN14181 QAL1 certificate
Yes
EN 15267-3 certificaat
Yes
Response time
1 s ... 600 s Instelbaar
Measuring gas temperature
–40 °C ... +300 °C
Weight
≤ 12 kg
Electrical safety
CE
Downloads
Features: DUSTHUNTER C200
- Combination of transmittance and scattered light measurement
- For very low to high dust concentrations
- Automatic check of zero and reference point
- Contamination monitoring and compensation on both sides
- Automatic self-alignment
- For medium to large duct diameters
Benefits: DUSTHUNTER C200
- Suitable for sharply fluctuating dust concentrations
- Redundant measurement for reliable application
- Low-maintenance thanks to self-monitoring
- Equipped for limit values that will become smaller in the future
- Tested for suitability according to EN 15267
Applications: DUSTHUNTER C200
- Emission monitoring of power stations and waste incineration plants
- Monitoring of filter plants
- Measuring the dust concentration in exhaust fumes and waste air channels in front of and after filter
